PMC-CPU/405 - ESD PMC-CPU/405 I/O Controller - PrPMC processor AMCC PPC405GPr,...
- Part Number:
- PMC-CPU/405
- Model Number:
- PMC-CPU/405
- Make:
- ESD
- Lead Time:
- Available
- Qty In Stock:
- Available
ESD PMC-CPU/405 I/O Controller - PrPMC processor AMCC PPC405GPr, 400MHz 64 MB RAM, 32 MB Flash, 2x CAN interfaces, TTL-level signals via PMC-I/O connector, PIM adapter module available Simple Type: I/O Controller
The PMC-CPU/405 is a PCI Mezzanine Card that automatically switches to monarch (PrPMC) or non-monarch mode according to the systems requirements. The PowerPCTM AMCC PPC405GPr with 400 MHz enables a performance of 608 MIPS. The board is equipped with 64 Mbyte SDRAM and 32 Mbyte Flash. You can support system time by RTC (with Gold Cap) or IRIG-B. For CAN bus synchronization tasks a high-resolution CAN hardware timestamp is supported. The PMC-CPU/405 comes with an Ethernet interface that is accessible as 100BaseT via a RJ45 connector at the front panel. The PMC-CPU/405 provides 2 CAN interfaces based on SJA1000 CAN controllers. The CAN signals are available as TTL only via PMC connector. External converters from CAN-TTL to CANISO11898 are available. Both CAN allow data transfer rates of 1 Mbit/s One of two RS-232 serial ports is available at the front panel via a DSUB9 connector, the other one via PMC-I/O connector. The flash memory carries the open source firmware ‘U-Boot’ enabling the PMC-CPU/405 to boot various operating systems from network and on-board Flash. The PMC-CPU/405 directly supports Linux and VxWorks with full support of on-board drivers by esd, others on request. There are also higher layer protocols available i.e. CANopen and DeviceNet.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1x RS-232 access via DSUB9 in front panel
- 1x RS-232 access via PMC-I/O connector
- 2x CAN interfaces, TTL-level signals via PMC-I/O connector, PIM adapter module available
- Ethernet IEEE 802.3, 100BASE-TX, 10/100 Mbit/s
- IRIG-B time code interface via PMC-I/O connector
- Linux and VxWorks supported, others on request
- PowerPC AMCC PPC 405GPr, 400 MHz, 32 bit
Specifications
- Ambient temp.: 0 ...+70 /C
- CAN: 2x CAN, controller SJA1000, CAN 2.0A/B, TTL-level signals, 1 Mbit/s, high resolution CAN hardware timestamp (FPGA), PMC-connector
- Connectors: PMC-connector Pn4: 2x CAN, Serial, IRIG-B, I²C front panel: Serial (console), 1000BaseT
- Ethernet: 100BaseT, IEEE802.3, RJ45-connector
- Humidity: Max. 90 %, non-condensing
- IRIG-B: Digital differential physical layer, IRIG B100 time code format, Decoding and time code generation
- Memory: From 16M x 32 bit SDRAM (64MB), up to 32M x 32 bit SDRAM (128 MB), 32 Mbyte flash
- Microprocessor: AMCC PPC405GPr, 400 MHz, 32 bit
- PCI: PCI 2.2, 32 bit 33/66 MHz, PrPMC acc. to Vita 32, monarch and non-monarch operation
- Power supply: 5 V, 3.3 V
- RTC: DS1685, backup by Gold Cap
- Serial: 1x RS-232 at front panel (DSUB9), 1x RS-232 at PMC-I/O connector Pn4 (4-pin)
Applications
- None Available
Aliases
- None Available
Related Items
PMC-CAN/266-2
ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, ISO11898, Works- PMC-CAN/266-RIO
ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, signals with 
PMC-CAN/331-1
ESD=PMC-CAN/331-1 I/O Controller - 1x CAN, ISO 11898, CAN interfaces- PMC-CAN/331-2
ESD PMC-CAN/331-2 I/O Controller - 2x CAN, ISO 11898, PMC