VME-PMC-CADDY/2 - ESD VME-PMC-CADDY/2 I/O Controller - VMEbus CPU board for two...
- Part Number:
- VME-PMC-CADDY/2
- Model Number:
- VME-PMC-CADDY/2
- Make:
- ESD
- Lead Time:
- Available
- Qty In Stock:
- Available
ESD VME-PMC-CADDY/2 I/O Controller - VMEbus CPU board for two single PMC modules, P2-pin assignment acc. to Vita 35 (P4V2-64ac, P4V0-64) (no interconnection between PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus Simple Type: I/O Controller
The VMEbus unit VME-PMC-CADDY/2 is a VME64-base board that can carry up to two PMC modules of normal size. For the VMEbus connection, esd electronics uses the VME-PCI Bridge Tsi148 by Tundrap. The Tsi148 design allows the board to operate either as slave or as master on the VMEbus. Operating as a master, it supports a 4-level arbiter. The VMEbus interrupt can be applied to any of the seven interrupt-request lines. Two 160-pin VG-connectors (complementary to DIN41612) connect the board to the VMEbus for VME64 systems. LEDs in the front panel indicate an active VMEbus-interrupt request and a VMEbus access onto the board. The two PMC slots, designed according to the standard IEEE Std 1386-2001 (except the standard I/O pin routing)), make it possible to insert all PMC modules using 3.3 V signaling. In addition to the connectors for the PMC address/data and control signals, every slot of the VME-PMC-CADDY/2 has an I/O-connector that applies the I/O signals of the PMC modules to VMEbus connector P2. Two different P2 pin assignments are available: In the standard configuration, each P2-pin connects to one I/O-pin of the PMC modules acc. to VITA 35 (P4V2-64ac, P4V0-64). In the option ‘-32P’ the pin assignment is acc. to IEEE Std 1386-2001, Table 8. This pin assignment offers the connection of the two PMC-modules via P2.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 128 Mbyte DDR2 RAM ECC
- 2eVME and 2eSST fast protocol
- 2x RS-232 serial interface
- 4 Mbyte Flash (NOR)
- 4-level arbiter
- 400 MHz
- Address/data up to A64/D64
- Conduction cooled version
- CPU
- Freescale MPC 8349
- Master or slave functionality
- Option ‘-32P2’: different P2-pinning
- Optional one XMC according to VITA 42.3
- Options
- PCI 64 bit at 66 MHz, 3.3 V only
- PMC I/Os applied to VMEbus P2, signals routed acc. to VITA 35 (P4V2-64ac, P4V0-64)
- PMC Slots
- PPMC according to VITA 32
- Slots according to IEEE Std 1386-2001 specified
- Two single size PMC modules insertable
- Versions for extended temperature range available
- VME-PCI Bridge Tundra Tsi148
- VME64-extension connector
- VMEbus Interface
Specifications
- Address modifier: Standard supervisory and non-privileged data access, extended supervisory and non-privileged data access, short supervisory and non-privileged access
- Base address: Geographical addressing
- Board size: 160 mm x 233 mm
- Connector types: P1, P2: VMEbus (160 pins), J11, J12, J21, J22: PMC address/data, J13, J23: PCI 64 signals, J14, J24: PMC I/O signals
- Controller: TUNDRA Tsi148
- Humidity: Max. 90 %, non-condensing
- LEDs: LEDs in the front panel indicate VMEbus interrupt and VMEbus access
- Size: Two single size modules
- Standard: IEEE Std 1386-2001
- Temperature Conduction Cooled: -40...+85 /C (Order no.: V.1916.02 /.11)
- Temperature Standard: 0...50 /C (Order no.: V.1915.02/.11), -40...+85 /C (Order no.: V.1915.03 /.13)
- VME dimensions: 6 U height, 4 HP width
- VME PCI Bridge: Tundra Tsi148, 32/64 bit at 33/66 MHz
- VMEbus access: Legacy protocols to protect existing VME investment, VME64 extensions, 2eVME and 2eSST protocols
- VMEbus connector: 160-pole VG connector (complementary to DIN 41612), acc. to VME64 extension standard
- VMEbus standard: IEEE 1014 Rev. D
- Voltage level: 3.3 V (signal level) only
- Voltage option: Optional onboard 3.3 V generation
- XMC option: Slot 1 optional with XMC (J15) interface according to VITA 42.3 standard.
Applications
- None Available
Aliases
- None Available
Related Items
VME-PMC-CADDY
ESD VME-PMC-CADDY I/O Controller - VMEbus base board for two
VME-PMC-CPU/2-T-32P
ESD VME-PMC-CPU/2-T-32P I/O Controller - PPMC according to VITA 32,
VME-CAN4
ESD VME-CAN4 I/O Controller - Intelligent CAN interface board with- VME-CAN4-2
ESD VME-CAN4-2 I/O Controller - Intelligent CAN interface board with