AMC-ADIO24 - ESD AMC-ADIO24 I/O Module - The eight over voltage protected...
Request Quote
For Price
- Part Number:
- AMC-ADIO24
- Model Number:
- AMC-ADIO24
- Make:
- ESD
- Lead Time:
- Available
- Qty In Stock:
- Available
ESD AMC-ADIO24 I/O Module - The eight over voltage protected analog inputs connect to eight 16-bit A/D converters with a sampling rate of up to 200 kHz each. Simple Type: I/O Module
The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA to the PCIe host CPU’s memory minimizes undesired latency during PCIe read cycles at higher data rates. This module reduces the read cycles of the PCIe CPU to setup and diagnosis tasks. esd electronics designed each of the 24 TTL-level I/Os for configuration as input or output, high side driver, low side driver or both (sink/source), and the I/O port’s state reads back in any configuration via a comparator with hysteresis.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2 analog outputs ±10 V, 16 bit
- 24 digital I/Os, TTL level
- 4 trigger I/Os (RS-485)
- 8 analog inputs ±10 V, 16 bit
Specifications
- Ambient temp.: 0 ...+70 °C (free convection)
- Analog inputs: 8 inputs, ±10 V, 16-bit resolution, up to 200 kHz sampling rate
- Analog outputs: 2 outputs, ±10 V, 16-bit resolution, up to 600 kHz update rate
- Connectors: J1: AMC B/B+ compatible (MicroTCATM) P1 ... P7: 10-pin har-link (I/Os)
- Digital I/Os: 24 I/Os, TTL level , programmable as input only, output sink, output source, output sink/source, max. current/channel: 64 mA sink, 32 mA source, up to 1 MHz input sampling rate, up to 1 MHz output update rate
- Dimensions: mid-height, single-width (73.5 x 180 mm) AMC
- Humidity: max. 90%, non-condensing
- I/O control: FPGA Spartan II
- IPMI: IPMI V1.5, controller Atmel AVR
- LEDs: blue (hot plug), red (IPMI), green (OK)
- mTCA: PICMG MTCA.0 R1.0, PICMG AMC.0 R2.0
- PCIe bridge: PCISIG PCIe spec. R.1.0a
- Power supply: 3.3 V (I3.3VMPMAX
- Trigger ports: 4 RS-485 ports, trigger/sync, max. 1 MHz
- Updates: PICMG HPM.1 R1.0
Applications
- None Available
Aliases
- None Available